19
Sep
These kits are sprung for use with a SPEC or aftermarket single. If you think Zilvia has too many assholes.
The compression ratio the valve timing the throttle and ECU have been modified.
Sr20det flywheel torque specs. NISSAN SR20DET TORQUE SPECS Part ftlbs inlbs Intake Manifold 13-15 156-180 inlbs Exhaust Manifold 27-35 Crankshaft Pully Bolt 105-112 Flywheel Bolts 61-69 Pressure Plate Bolts 16-22 192-264 inlbs Engine Mount Through Bolts 33-40 Valve Cover BoltsNuts 69-87 inlbs Throttle Body Mounting Bolts 156-192 inlbs Fuel Rail Mounting Bolts 70-105 inlbs. Torque all the bolts down to 30-60-then whatever you decide to torque it down to between 94-101 ftlbs. If you think Zilvia has too many assholes.
Intake duration 212-248 deg lift 80-110 mm exhaust duration 244 deg lift 113 mm. SR20VET was equipped with Garrett T28 turbocharger and compression ratio was decreased to 9. Fuel injectors were 444 ccmin.
Maximal boost pressure reached 87 psi 06 bar enough to gain 280 HP at 6400 RPM and torque 315 NM at 3200 RPM. All SPEC SR units are now a 254mm diamter upgrade to the stock 240mm. However the 254mm unit still fit the original flywheel or any aftermarket aluminum flywheel that does not have a 240mm surface.
We can accommodate the 240mm friction plate with a 240mm disc or upgrade the friction surface. Does anyone know what the torque specs are for the flywheel to crank on a s13 sr20det. I have looked everywhere on the internet someone told me 101 ftlbs but that cant be right someone else told me 66 ftlbs.
Ka24de —flywheel bolts —-105-112 ft-lb. —pressure plate bolts—16-22 ft-lb. —pressure plate bolts—25-33 ft-lb.
It produces from 115 to 165 PS 85 to 121 kW. 114 to 162 HP of horsepower and from 169 to 192 Nm 172 to 196 kgm 1246 to 1416 lbft of torque. There was a more powerful version of SR20DE from Autech Japan.
The compression ratio the valve timing the throttle and ECU have been modified. The Autech SR20DE produces. Sales support 352-241-8399 monday to friday from 10am to 5pm est.
The Super Twin is for street and track use in cars with extreme horsepower and torque 700-1500 ft lbs tq. The Super Twin offers near-stock drivability tremendous life expectancy a no-shimmingsetup bolt-in installation and maintenance free operation. All Types of Driving.
Torque specs on flywheel bolts. Post by spoolinitup33 15 Jun 2009 1824 Ive been trying to figure out what the torque specs are on the bolts that hold the flywheel on a sr20det and cant find them anywhere. I called Spec Clutches and the guy told me that if it was a Spec flywheel they should be torqued to 28 ft.
But mine is just a. 54 kits found for Flywheel Bolts ARP offers two styles of Flywheel bolts. Premium grade Pro Series with a 200000 psi rating and High Performance with a 180000 psi rating.
They are both heat-treated prior to thread rolling and machining feature an exclusive flat 12-point head design and larger than stock shank diameter for increased. It produces from 133 to 147 PS 98 to 108 kW. 131 to 145 HP of horsepower and 191-210 Nm 141-155 lbft of torque.
The breakdown of the engine code is as follows. MR Engine Family. Nissan 20L SR20DETRN14 DOHC Turbo 1991-94 M12 Head Stud Kit.
KA24DE Head Stud Kit. Nissan VQ35 12pt Head Stud Kit. Nissan CA1618DE CA1618DET undercut Head Stud Kit.
Nissan VR38DETT V6 CA625. Bolt holes on the flywheel to clear the radius under the head of the bolt. 4 Lubricate the threads of the bolt with LOCTITE 242 and the under head of the bolt with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT.
Then install the flywheel onto the crankshaft and tighten the bolts hand tight. 5 Using an alternating or criss cross pattern. SR20 Engine Torque Specs.
Exhaust Manifold If you are looking at the engine from the nose of the car starting from the leftmost stud and proceeding right this is the sequence for tightening7-5-3-1-2-4-6-8 from the middle out in a x pattern 27-35 ft-lbs. The SPEC Super Twin is for street and track use with extreme horsepower and torque 700-1500 ft lbs tq offering near-stock drivability tremendous life expectancy a no shimmingsetup bolt-in install and maintenance free operation. With all billet construction these units are smooth and quiet.
This Stage 1 clutch will fit all 89-03 20L SR20DET-S13S14 Silvia 240 Nissans and will hold 310 lbft. Of torque at the flywheel. These kits are sprung for use with a SPEC or aftermarket single.